Glass Conductivity Cell K=1

£93.00

Glass Conductivity Cell

SKU: E8071 Category:

The E8071 Glass Conductivity Cell is for general purpose dip applications. It is ideal for general laboratory measurements over the range of 1uS/cm to 200mS/cm. Typical applications could range from checking the quality of source water to the quality control of Brine preparations.

The 12mm glass body has two internal active platinum electrodes 1cm apart. They have to be submerged in the samples to a minimum depth of around 2cm.

The E8071 Conductivity cell is suitable for use with the complete range of EDT conductivity meters and contains a temperature sensor to enable all readings to be temperature compensated (ATC). Calibration solutions are available and the recommendation for general purpose cells (K=1) is to calibrate using a 1413uS/cm standards. The A3052 and A3053 are ideal solutions.

Temperature reading and compensation range is 0-50 degrees centigrade. For accurate analysis below 5uS/cm use a K=0.1 cell (E8072). For process measurements or where the use of glass is not acceptable EDT manufacture a complete range of Conductivity cells to suit most applications.

The E8071 Glass Conductivity cell has a fixed 1 metre cable with a DIN connector to fit EDT meters. We also manufacture conductivity cells compatible with most models and make of instrument. Contact us so that we can advise the part number and price.

Visit our YouTube Channel for more information about our products.

Additional information

Weight 0.15 kg
Dimensions 26 × 9 × 4 cm
Length

155mm

Diameter

12mm

Connector

DIN Connector for EDT Conductivity Meters

Body Type

Glass

Cell Type

Platinum Plates

Conductivity Cell Range

100µS-100mS

Commodity Code

90279050

Reviews

There are no reviews yet.

Be the first to review “Glass Conductivity Cell K=1”

Your email address will not be published. Required fields are marked *

Product Brochure

Download