Temperature Probe


Temperature probe with 3.5mm Jack socket.

SKU: E8052 Category:

The E8052 Stainless Steel Temperature probe is for use with the FE253 pH meter and is connected via the 3.5mm Jack socket on the front panel.

The Temperature probe measures to within +/- 0.1 degrees centigrade over the full 0-100 degree range.

It is important to measure the temperature during pH analysis. If the temperature of the buffer solutions is different to that of the standards then temperature correction is required. Automatic or manual temperature compensation is available on most pH meters.

The buffer solution temperature should also be noted as the actual pH will change with temperature. In this case the actual pH has to be inputted into the calibration. e.g.  pH7 buffer solution is pH7.00 at 25 degrees but is pH7.02 at 20 degrees C.

The E8052 fits into the E8060 electrode stand and should be rinsed between measurements.

Additional information

Weight 0.15 kg
Dimensions 26 × 9 × 4 cm



Stainless Steel

Temperature Range


Temperature Accuracy

+/- 0.1°C

Commodity Code



3.5mm Jack


There are no reviews yet.

Be the first to review “Temperature Probe”

Your email address will not be published. Required fields are marked *