Reference Electrode Flowcell


Reference Electrode Flowcell for use with ISE & pH Flowcells.

The EDT directION Reference Flow Cell Electrode is designed for use with the ISE flowcells. It works for Nitrate, Ammonium, Chloride, Potassium and Calcium ISEs. This electrode has a 2.3mm bore and is not suitable for use with the Fluoride Flow Cell..

The Reference cell is slotted into the 2 or 3 place flowcell holder with an ISE. This makes a working electrode system. It incorporates an Ag/AgCl reference refillable at the top of the cell by peeling back the label and revealing the fill hole.

Connection to the Ion Meter is made via a 1mm pin at the top of the electrode next to the fill hole. When configuring the flowcell holder it is important that the reference electrode is upstream. i.e. the first to come into contact with the standard and sample flow. This will ensure good integrity of contact between the cells.

The reference junction is of porous Teflon and is resistant to blockage.

The reference is already supplied filled with Saturated KCl/AgCl filling solution .It is normal for some of the KCL to remain un-dissolved. This will not detract from the performance of the system.

For a complete system you will require:

  • A Reference and ISE Flow Cell
  • A Flow Cell Holder
  • A combination cable to a BNC connector
  • An Ion meter (EDT model QP459)

Tubing and pump are not supplied.


Visit our YouTube Channel for more videos.

Additional information

Weight 0.15 kg
Dimensions 30 × 14 × 14 cm
Bore Diameter


Flowcell Width


Dead Volume





2mm Pin (ref) or BNC for Combination with an ISE.

Commodity Code



There are no reviews yet.

Be the first to review “Reference Electrode Flowcell”

Your email address will not be published. Required fields are marked *

Flow Cell ISE Brochure