Nitrate Flowcell ISE

The Nitrate Flow cell from EDT direction is a solid state, zero dead volume sensor that can be used independently or positioned in series to create a multi-element sensor system. A reference flowcell is required for each set of flowcells.

• Zero dead volume
• Solid state
• Fast response
• Long lifetime
• Unlimited shelf life

The ideal flow rate is around 1-10ml per minute using a peristaltic pump. Nitrate flow cells have an ID  2.3mm.

These Sensors are ideal for Flow Injection Analysis (FIA) or any constant or continuous monitoring application. Measurements can be made in Zero flow or in stop/flow or static measurements

The Nitrate sensor is in the form of a small solid state Acrylic block with a bore diameter of 2.3 mm. A flow through reference is required for operation (cat no 4001).

These small ISEs have exactly the same specifications as the standard Nitrate ISE (cat no 1021) but has further advantages such as: Zero dead Volume, Large sample contact area, low sample volume (min 50 microliters), easy cleaning.

The Nitrate Flow Cell has unlimited shelf life. Supplied with O rings, 1 metre cable with BNC connector.

Requires reference flow cell (cat. 4001), flow cell holder (Cat 4443). Tubing and pump not supplied.

The EDT flowcell holders are constructed from Aluminium with Stainless steel fittings. Standard holders accept 1,2 or 3 modules plus a reference flowcell EDT direction produce standard solutions and ISABs for all ISE analysis.

Specification is the same as Nitrate Half cell ISE  Part No. 1021.

Visit our YouTube Channel for more videos.