Polymer Dip Cell K=1

The K=1 Polymer Conductivity Cell is for general purpose dip applications and is ideal for general laboratory measurements over the range of 1uS/cm to 200mS/cm.

The E8070 is ideal where glass is not acceptable or there is a possibility of damage during use. Typical applications could range from checking the quality of source water to the quality control of Brine preparations.

The 12mm glass body has two internal active platinum electrodes 1cm apart. They have to be submerged in the samples to a minimum depth of around 2cm.

The K=1 Polymer Conductivity Cell is suitable for use with the complete range of EDT conductivity meters and contains a temperature sensor to enable all readings to be temperature compensated (ATC). Calibration solutions are available and the recommendation for general purpose cells (K=1) is to calibrate using a 1413uS/cm standard. The A3052 and A3053 solutions are ideal.

Temperature reading and compensation range is 0-50 degrees centigrade. For process measurements or where the use of glass is acceptable EDT manufacture a complete range of conductivity cells to suit most applications.

The E8070 Conductivity Cell has a fixed 1 metre cable with a DIN connector. We also manufacture conductivity cells compatible with most models and make of instrument. Contact us so that we can advise the part number and price.

Visit our YouTube Channel for more information about our products.