Temperature Probe (Jack)

The E8051 Stainless Steel Temperature probe is for use with the QP451, QP458 and QP459 Instruments. It is also used with the RE357, DR359, FE257 and QC355 pH meters and is connected via the Jack socket on the rear panel.

The Temperature probe measures to within +/- 0.1 degrees centigrade over the full 0-100 degree range.

It is important to measure the temperature during pH analysis. If the temperature of the buffer solutions is different to that of the standards then temperature correction is required. Automatic or manual temperature compensation is available on most pH meters.

The buffer solution temperature should also be noted as the actual pH will change with temperature. In this case the actual pH has to be inputted into the calibration. e.g.  pH7 buffer solution is pH7.00 at 25 degrees but is pH 7.02 at 20 degrees C.

The E8051 fits into the E8060 electrode stand and should be rinsed between measurements.