Glass Conductivity Cell K=1 Mini DIN Connector

The E8074 Glass Conductivity Electrode is for general purpose dip applications. It is ideal for general laboratory measurements over the range of 1uS/cm to 200mS/cm. Typical applications could range from checking the quality of source water to the quality control of Brine preparations.

The 12mm glass body has two internal active platinum electrodes 1cm apart. They have to be submerged in the samples to a minimum depth of around 2cm.

The E8074 Conductivity cell is suitable for use with the Series 4 QP481 and QP458 conductivity meters only and contains a temperature sensor to enable all readings to be temperature compensated (ATC). Calibration solutions are available and the recommendation for general purpose cells (K=1) is to calibrate using a 1413uS/cm standard. The A3052 and A3053 standards are ideal.

Temperature reading and compensation range is 0-50 degrees centigrade. For accurate analysis below 5uS/cm use a K=0.1 cell (E8075). For process measurements or where the use of glass is not acceptable EDT manufacture a complete range of Conductivity cells to suit most applications.

The E8074 Glass Conductivity Electrode has a fixed 1 metre cable with a Mini DIN connector to fit Series 4 EDT meters. We also manufacture conductivity cells compatible with most models and make of instrument. Contact us so that we can advise the part number and price.

Visit our YouTube Channel for more information about our products.