Conductivity Low Volume (200µL) Flow Cell

The A6000 Low Volume Conductivity Flow Cell is for continuous flow applications. It is ideal for measurements over the range of 1µ/cm to 200mS/cm.

This specially made conductivity cell was originally designed for the continuous monitoring of milk. However it can be used for the measurement of almost any conducting solution or liquid.

The rugged polymer body houses a glass micro cell containing two active platinum electrodes with a K=1 cell constant. The inlets is on the side of the electrode allow the micro tubing to be connected via a screw thread for secure connection.

The A6000 Conductivity cell is suitable for use with the complete range of EDT conductivity meters. It contains a temperature sensor to enable all readings to be temperature compensated (ATC).

Calibration solutions are available and the recommendation for general purpose cells (K=1) is to calibrate using a 1413 µS/cm standard. The A3052 and A3053 are ideal solutions.

Temperature reading and compensation range is 0-50 degrees centigrade. For process measurements or where the use of glass is not acceptable EDT manufacture a complete range of conductivity cells to suit most applications.

The A6000 Low Volume Conductivity Flow Cell has a fixed 1 metre cable with a DIN connector to fit EDT meters. We also manufacture conductivity cells compatible with most models and make of instrument.

Visit our YouTube Channel for more information about our products.