Conductivity Low Volume (200µL) Flow Cell with ATC


Polymer Bodied Conductivity Cell for continuous flow application.

SKU: A6000/ATC Categories: ,

The A6000/ATC Low Volume Conductivity Flow Cell is for continuous flow applications. It is ideal for measurements over the range of 1µ/cm to 200mS/cm. The cell includes Automatic Temperature measurement and Compensation (ATC) over the full range.

Temperature is measured using a 10K Thermistor.

This specially made conductivity cell was originally designed for the continuous monitoring of milk. However it can be used for the measurement of almost any conducting solution or liquid.

The rugged polymer body houses a glass micro cell containing two internal active platinum electrodes (K=1). The inlets is on the side of the electrode allow the micro tubing to be connected via a screw thread for secure connection.

The A6000/ATC Conductivity cell is suitable for use with the complete range of EDT conductivity meters. This particular cell contains a temperature sensor to enable all readings to be temperature compensated (ATC).

Calibration solutions are available and the recommendation for general purpose cells (K=1) is to calibrate using a 1413Sµ/cm standard such as EDT A3052 and A3053.

Temperature reading and compensation range is 0-50 degrees centigrade. For process measurements or where the use of glass is not acceptable, EDT manufacture a complete range of Conductivity cells to suit most applications.

The A6000/ATC Low Volume Conductivity Flow Cell has a fixed 1 metre cable with a DIN connector to fit EDT meters. We also manufacture conductivity cells compatible with most models and make of instrument.

Visit our YouTube Channel for more information about our products.

Additional information

Weight 0.15 kg
Dimensions 30 × 14 × 14 cm




Cap Diameter




DIN Pin Configuration

7 Pins:, Pin 1: ATC 1 (10K or 30K), Pin 2: Plate 1 split, Pin 3: Plate 1 split, Pin 4: Ground, Pin 5: Plate 2 split, Pin 6: Plate 2 split, Pin 7: ATC 2 (10K or 30K)

Cable Length


Body Type

Tough polymer. Chemically Resistant

Cell Constant


Cell Type

Glass with Active Platinum plates

Cell Volume


Temperature Compensation

Automatic compensation and measurement.


There are no reviews yet.

Be the first to review “Conductivity Low Volume (200µL) Flow Cell with ATC”

Your email address will not be published. Required fields are marked *

Product Brochure